top of page

NIKKO DTF P800

Nikko P800 DTG.JPG

Custom Modified Epson P800 DTG T-Shirt Printer with WIFI. It can be used to print on both Light and Dark Garments. Print area is A2 Size (16”x20”) with an adjustable platen. The Base is full electronic with a belt drive.
 
Bonus: All our P800 DTG Printers come with Chipless Firmware, so you never have to reset the ink cartridges. Ink levels are frozen at 100% Full.
COST: $6,390.00 + Shipping

Included with DTG Printer:​
 

  • Epson Driver Software

  • NikkoRip Software (Windows Only)

  • Power Cord

  • USB Cord

  • 1 CISS Bulk Ink Supply System with Dampers Attached

  • 1 Set of Syringes with needles (Use To Fill Bulk Ink Supply)

  • 1 Syringe with hose attached (Use for Purging Print Head)

  • Electronic base

​

Inks Recommended: FireBird Inks or Dupont Textile Inks Only (Inks Not Included)

​

Warranty: 6 Months Warranty on all parts except for the Print Head and Capping Station  . We also provide 100% full Customer Support via Email Only. 

​

Production time: All orders will ship in 2 business days. 

We only accept Direct Credit Card Payments (We do not Accept PayPal). So once you're ready to place an order, email us and we will send you a Secured electronic Invoice to make payment. 

​

Things To Know:
 

  • Room Temperature: This is by far the most important factor, in owning and operating any DTG Printer. Room Temperature should be below 76 Degrees Fahrenheit. If Humidity is too high, textile inks will begin to clog very quickly. 
     

  • T-Shirt Material: For Best Results, we recommend 100%Cotton or 50/50 Blends. You can also print on 100% Polyester.
     

  • Maintenance: Cleaning Solution, Cleaning Foam Swabs and Cleaning Wipes can all be purchased from Firebird.
     

  • Wet Cap: This is the method we use to keep the print head from clogging by simply selecting the "Paper Guide Cleaning" option from the printers digital display Maintenance Tab. The Print head will move away from the capping station long enough for you to use a syringe and pump cleaning solution in the capping station. The print head will then move back and park over the capping station and lower into the cleaning solution. This will keep your print head submerged in cleaning solution while the printer is not in use to prevent it from clogging.
     

  • Pretreatment: Pretreatment is required for Dark Garments and can be purchased from Firebird. Also Prints on white T-shirts are much more Vivid when Pretreatment is applied.
     

  • Pretreat Sprayer: The Wagner Sprayer is great for applying Pretreatment to garments. Please see the Nikko DTG YouTube Channel for more details. 
     

  • Heat Press: A "Good" Heat Press is required for curing Textile Inks after garment is printed. We Recommend Hotronix or Geo Knight. For lower budget heat presses, purchase from Amazon this way you can see Customer Reviews.
     

  • Heat Press Sheets: We recommend using a Teflon Sheet or Parchment Paper.
     

    • Teflon Sheet (Gives print a Gloss Finish) (Can also use to press pretreated T-Shirt)
       

    • Parchment Paper (Gives print a SemiGloss Finish) (Can also use to press pretreated T-Shirt)
       

    • Kraft Paper (Gives print a Matte Finish) (Do not use to press Light Pretreated T-Shirts. Will eventually leave yellow box around Print)

​

Nikko DTG P800-1.JPG

Terms Of Agreement And Warranty

Download: Disclaimer

​

Download: Terms Of Agreement And Warranty

bottom of page