How To Install P600 Chipless Firmware

Download and Extract Firmware:

Download and Extract License Program: (Password: 12345)

1. Turn Off Printer and Connect USB Cord from computer to rear port of Printer.

2. Press and Hold 3 Buttons on printer (HOME/POWER/BACK)

Control Panel

3. Release your finger from the "Back Button" after 5 seconds. Continue to

hold the Home and Power buttons until the Program Update Mode screen

comes up as seen in the pic below.

4. Click EPFWUPD in the downloaded and extracted folder

labeled P600_FWE282TL_AT13H6

5. Follow the 7 Steps.

6. After Installation is Complete, The Blue Light on the Printer will start

Flashing. After it is complete, It will say "FINISHED on the Printer's Touch

screen display as seen in the pic below.

7. Click Finish on the 7 Step Program and press the power button on the

printer, then restart the printer.

9. Click License in the download and extracted folder labeled License_en

10. Click Activate Online and enter the Activation Code then click OK.

11. Restart Printer. Ink Levels will be frozen at 100% Full so you never have to

reset the cartridges.